How To Tension A Sawmill Blade

To tension a sawmill blade, you typically follow these steps:

Safety First: Ensure the sawmill is turned off and unplugged before attempting to adjust the blade tension.

Locate Tension Mechanism: Find the tension adjustment mechanism on your sawmill. This could be a bolt, knob, or lever depending on the model.

Adjust Tension:

If the blade is too loose, tighten the tension by turning the adjustment mechanism clockwise.

If the blade is too tight, loosen it by turning counterclockwise.

Check Blade Alignment: After adjusting the tension, check that the blade is properly aligned and tracking straight.

Test: Run the sawmill without a log to test if the blade runs true. Make further adjustments as necessary.

For specific instructions, refer to your sawmill's manual as different models may have unique requirements.