Introduction And Adjustment of Vertical Woodworking Band Saw Wheel

Saw wheel is the main component of vertical woodworking band saw machine. The upper and lower saw wheels must be adjusted on a vertical plane. The outer diameter edge of the saw wheel should be perpendicular to the center of the base saw.

The lower saw wheel is adjusted by the rebuttal bolt on the suspension bearing bracket. Adjustment of the upper saw wheel: loosen the tightening bolt behind the upper saw wheel bearing seat, rotate the adjusting screw, and make the bearing seat of the upper wheel move relative to the body, so that the position of the upper wheel is adjusted in the horizontal plane.

Upper wheel lifting device: is used to correctly adjust the center distance between the two wheels, so that according to the length of the saw blade for tension and loading and unloading. Push the handwheel forward, turn the handwheel, the upper saw wheel can rise or fall parallel. Log band saw machine configuration if you need to adjust the incline of the saw wheel, pull the handwheel back, so that the dowel on the handwheel shaft and left cone tooth inlaid separation, then turn the handwheel, only the right cone tooth rotation, through the screw, can make the right guide column rise and fall separately, to adjust the incline.