Sawmill Line / Wood Band Saw / Rip Saw / Blade Sharpener
Home » News » Precautions for Using Band Saw Machine
Precautions for Using Band Saw Machine
Views: 0 Author: Site Editor Publish Time: 06-05-2024 Origin: Site
Band saw machine is a common tool for sawing wood in wood mills. The band saw machine uses a saw as a tool to cut wood through the reciprocating motion of the band saw blade. Common band saw machines include vertical band saw machines and horizontal band saw machines.
What are the hazards when using band saw? Today, YSDMILL will give you a detailed explanation.
The injury accidents of the band saw mainly include the cutting injury of the saw, the fracture and ejection of the saw blade, and the striking injury of the wood. So how to effectively prevent these injuries?
1. Sawing injury can be prevented by using safety protection devices and correct operation. The track of the sports car of the large band saw should be straight, with travel switches at both ends, and warning bars should be set at both sides of the log carriage.
2. How to prevent the damage caused by the broken saw blade. The welding of band saw blade shall be firm and flat. The number of saw blade joints shall not exceed 3. The length between two joints shall be more than 1/5 of the total length. The joint thickness shall be basically the same as the saw blade thickness. The teeth shall be sharp and the tooth depth shall not exceed 1/4 of the width of the saw blade. The thickness of band saw blade shall match the matching band saw wheel. Avoid using large thickness saw blade for small wheel, which may cause fracture and personal injury. The transverse crack of the band saw blade shall be strictly controlled. If the crack is too long, it shall be cut off and re-welded.
3. The impact injury of wood can be prevented by installing YSDMILL wood automatic transmission system. It can automatically feed and discharge. It can save labor and ensure safety.
