Sawmill Line / Wood Band Saw / Rip Saw / Blade Sharpener
Home » News » Rolling Sequence of Band Saw Blade Tension
Rolling Sequence of Band Saw Blade Tension
Views: 0 Author: Site Editor Publish Time: 09-13-2025 Origin: Site
The rolling of the band saw blade tension of the woodworking band saw machine can be divided into two stages. The first stage is the rough rolling stage, which is commonly known as the rolling stage of the "running big circle".
In the rough pressing stage, there are two main purposes to be achieved. One is to make the tension of the whole saw blade basically meet the technical requirements, and the tension should be 70~80%. The second is to make the tightness of the saw mouth basically meet the technical requirements. Now YSDMILL will tell you several different rolling sequences in the rough rolling stage:
1. Start from the middle part of the saw blade, roll and compact the front and rear edge rows respectively, and press the tooth edge direction straight to the front mouth boundary, and press the back edge direction straight to the rear mouth boundary.
2. Roll from the front and back edge of the saw blade to the middle.
3. Start from the middle part of the saw blade, roll in the direction of the tooth edge until it reaches the front mouth. Then, start from the middle of the saw blade and roll towards the back edge until the back edge is crushed.
4. Start from the middle of the saw blade and roll towards the back edge until it reaches the back mouth. Then, start from the middle of the saw blade and roll towards the tooth edge until it reaches the front mouth.
5. Start from the front edge of the saw blade and roll towards the back edge until it reaches the back edge.
6. Start from the back edge of the saw blade, roll in the direction of the tooth edge until the front edge is crushed.
